Vinometer: Difference between revisions

From Distillers Wiki
Jump to navigation Jump to search
(Recreating page from http://web.archive.org/web/20100706203045/http://wiki.homedistiller.org/Vinometer)
 
(Add image.)
Line 2: Line 2:


The vinometer is operated by holding it upside down and filling the mouth (C) with the liquid to be measured. The liquid is slowly gravity fed down the neck of the vinometer (B) until 5 or 6 drips exit at (A). The vinometer is then inverted which causes the solution to slowly drain down the neck from (A) toward (C). The liquid will pause at the appropriate [[Proof|proof]], allowing an accurate reading.
The vinometer is operated by holding it upside down and filling the mouth (C) with the liquid to be measured. The liquid is slowly gravity fed down the neck of the vinometer (B) until 5 or 6 drips exit at (A). The vinometer is then inverted which causes the solution to slowly drain down the neck from (A) toward (C). The liquid will pause at the appropriate [[Proof|proof]], allowing an accurate reading.
[[image:vinometer.jpg|thumb|left| A typical vinometer.]]


[[Category:Equipment]]
[[Category:Equipment]]
[[Category:Glossary]]
[[Category:Glossary]]

Revision as of 19:10, 18 August 2017

A simple device used to measure the ABV of a mash, beer or wine from 0-25%.

The vinometer is operated by holding it upside down and filling the mouth (C) with the liquid to be measured. The liquid is slowly gravity fed down the neck of the vinometer (B) until 5 or 6 drips exit at (A). The vinometer is then inverted which causes the solution to slowly drain down the neck from (A) toward (C). The liquid will pause at the appropriate proof, allowing an accurate reading.

A typical vinometer.