Home Distiller

Thanks much thought I had read that its important to hold at about 172.5 didn't realize that was only for reflux. Lots and lots to learn!!

Running my sacrificial box wine run. Every thing seems to working well except my collection rate seems very slow only about 150ml in first hr. I am in pot still mode running one 1350W element throttled down to maintain 173 deg F at the head. getting a steady drip but seems awfully slow.

Thanks, Yes Ive been thinking I might use some chunks of bike innertube to cover the electrical connections.

Just started my first cleaning run on my 2" Boka built it pretty close to montanadaves guide and a lot of other suggestions from the forum. Cant wait to actually make some product. Only setback so far had to elevate my cooling water bucket little pond pump couldn't cut it. may get larger pump a...

Hi all, Close to finishing my 2" BOKA and am just pulling the last pieces together. Cant wait to post some pics and will do so soon. My question is what type of tubing is the best for my cooling circuit I have a 30 gal. plastic barrel for a tank and will be using a small pond pump. All of the t...

Thanks to everyone for the advice. Think I knew the answer before i posted. Think i will stick with the internal heater just a little nervous about running it flat out. I remember reading something about the router contoller. Is there a post with a diagram of your set up? Thanks again everyone!

Anyone have any experience with these? http://www.milehidistilling.com/heater-element-with-thermostat-1500w-115v/" onclick="window.open(this.href);return false;" rel="nofollow Buiding my 2" Boka with a 1/4 keg stainless boiler. I am chasing my tail trying to select a heating...

Hi to all glad I found this forum when I did have been wanting to try distilling for a long time and just about bought an air still. Stumbled on to the forum when researching air stills. Wow what a wealth of information where to start is the question. I am considering a small still for my first vent...