I have a 3 ton A coil from a split system heating/cooling unit.
I am sitting here looking at this thing,,,i can scrap it for the copper.or
any suggestions on using it to condense a still?
3 ton AC coil
Moderator: Site Moderator
- frodo
- Distiller
- Posts: 1727
- Joined: Sat Dec 07, 2013 11:55 pm
- Location: hiding behind a pine tree. bout 100 miles east of new orleans
- still_stirrin
- Master of Distillation
- Posts: 10372
- Joined: Tue Mar 18, 2014 7:01 am
- Location: where the buffalo roam, and the deer & antelope play
Re: 3 ton AC coil
You could use it to cool your recirculating water in a closed loop system. I certainly wouldn't attempt to run alcohol vapors through it.
ss
ss
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still: stock pot potstill
My 5-grain Bourbon recipe: Special K
-
- Master of Distillation
- Posts: 3002
- Joined: Wed Jul 31, 2013 4:45 pm
- Location: Hounds Hollow, VA
Re: 3 ton AC coil
++. I have a small cooling coil from a walk in fridge that I have hooked to my cooling rez. That baby would definitely do the job if you have the room. Don't have to worry about changing water with that.still_stirrin wrote:You could use it to cool your recirculating water in a closed loop system. I certainly wouldn't attempt to run alcohol vapors through it.
ss
LM Still Operating Instructions
Cranky's New Distiller's Advice
Using Google Search
Drinking Rum before noon makes you a Pirate not an alcoholic.
Cranky's New Distiller's Advice
Using Google Search
Drinking Rum before noon makes you a Pirate not an alcoholic.