Pot-thumper to Bubbler conversion
Moderator: Site Moderator
Pot-thumper to Bubbler conversion
I have a kit I bought off amzn 2 seasons ago, 8 gallon pot with thumper and condenser. The condenser was way too small so I built my own. See pic for entire unit.
I've also sweated together 3 parrots (2 for sale hint hint) as the continuous sampling with a hydrometer/cylinder was a pita.
My stripping runs get to about 90 proof and my spirit runs can get as high as 170.
For my second season running Uncle Jessie's recipe, I'm quite proud and surprised at the flavour and compliments I've received but want to get a little better for next year. I was looking to have a new lid made and buy parts to put together a 3" column with bubbler plates so that I could eliminate the second distillation. I don't think I'm sophisticated enough to run a reflux.
The questions:
-is 3 plates enough or do I need 4?
-is it a pita to part source it or should I buy a prefab unit?
-do I need a dephlegmator for this to work properly or can it run directly to the condenser?
Any advise is appreciated. Cheers from Niagara, ON!!!
I've also sweated together 3 parrots (2 for sale hint hint) as the continuous sampling with a hydrometer/cylinder was a pita.
My stripping runs get to about 90 proof and my spirit runs can get as high as 170.
For my second season running Uncle Jessie's recipe, I'm quite proud and surprised at the flavour and compliments I've received but want to get a little better for next year. I was looking to have a new lid made and buy parts to put together a 3" column with bubbler plates so that I could eliminate the second distillation. I don't think I'm sophisticated enough to run a reflux.
The questions:
-is 3 plates enough or do I need 4?
-is it a pita to part source it or should I buy a prefab unit?
-do I need a dephlegmator for this to work properly or can it run directly to the condenser?
Any advise is appreciated. Cheers from Niagara, ON!!!
Re: Pot-thumper to Bubbler conversion
Too me a plater/flute is a reflux. So yes you need a reflux condenser. Typically they are build as cooling management with a dephlegamater.
Myself would go for 4 plates or even 5.
Yes it is true that platers can do one and done runs but as with most stills there is always benefits running low wines.
Myself would go for 4 plates or even 5.
Yes it is true that platers can do one and done runs but as with most stills there is always benefits running low wines.
My first flute
My press
My twins
My controller
My wife tells me I fell from heaven covered in white. Why did they let me fall?
My press
My twins
My controller
My wife tells me I fell from heaven covered in white. Why did they let me fall?
- Saltbush Bill
- Site Mod
- Posts: 10364
- Joined: Thu Mar 17, 2011 2:13 am
- Location: Northern NSW Australia
Re: Pot-thumper to Bubbler conversion
Wont work without one.Walshie wrote: ↑Thu Nov 18, 2021 1:49 pm The questions:
-is 3 plates enough or do I need 4?
I mostly run 4, Ive tasted great booze made by others who swear by 5 plates.Tasted other stuff made on 3 plates ..it was also excellent, comes down to personal preference and what ya making at the time.
-is it a pita to part source it or should I buy a prefab unit?
Depends how handy you are at sourcing parts at the " right price"
-do I need a dephlegmator for this to work properly or can it run directly to the condenser?
- Yummyrum
- Global moderator
- Posts: 8602
- Joined: Sat Jul 06, 2013 2:23 am
- Location: Fraser Coast QLD Aussie
Re: Pot-thumper to Bubbler conversion
What Salty said . “ won’t work without one “
Well it will ,…. Sorta … kinda …. but it will be a useless fancy arse piece of shit .
Plates are pointless without some reflux .
Well it will ,…. Sorta … kinda …. but it will be a useless fancy arse piece of shit .
Plates are pointless without some reflux .
My recommended goto .
https://homedistiller.org/wiki/index.ph ... ion_Theory
https://homedistiller.org/wiki/index.ph ... ion_Theory
- squigglefunk
- Distiller
- Posts: 1001
- Joined: Fri Jul 16, 2021 9:27 am
Re: Pot-thumper to Bubbler conversion
on a different note, You might want to check that little ball valve on the lid for rust, my cheap still came with a bunch of those and they all started rusting and it was spreading into the stainless. I got pure brass plugs to replace them. I never used them anyway.
Re: Pot-thumper to Bubbler conversion
I run 2 plates on mine for whiskey, so 3 should be plenty for ujssm
:)
Re: Pot-thumper to Bubbler conversion
I exercise them quite a bit as I too noticed they were starting to rust. Only use to relieve pressure at end of run. Good starter unit though.squigglefunk wrote: ↑Fri Nov 19, 2021 6:08 am on a different note, You might want to check that little ball valve on the lid for rust, my cheap still came with a bunch of those and they all started rusting and it was spreading into the stainless. I got pure brass plugs to replace them. I never used them anyway.
Re: Pot-thumper to Bubbler conversion
Thanks for the thoughts lads.
Re: Pot-thumper to Bubbler conversion
but it will be a useless fancy arse piece of shit .
Haha well said
Haha well said
Here's to alcohol, the cause of, and solution to, all life's problems.
"Homer J Simpson"
"Homer J Simpson"
- Yummyrum
- Global moderator
- Posts: 8602
- Joined: Sat Jul 06, 2013 2:23 am
- Location: Fraser Coast QLD Aussie
Re: Pot-thumper to Bubbler conversion
Believe it or not , I actually failed School certificate English googe
Sorry walshie .perhaps not the best description .
My recommended goto .
https://homedistiller.org/wiki/index.ph ... ion_Theory
https://homedistiller.org/wiki/index.ph ... ion_Theory