Using baking soda to accelerate fermentation

Other discussions for folks new to the wonderful craft of home distilling.

Moderator: Site Moderator

Post Reply
diesel4ever
Novice
Posts: 99
Joined: Sun Nov 29, 2009 7:40 pm

Using baking soda to accelerate fermentation

Post by diesel4ever »

I don't know if this is a fluke but when I was having problems with my washes stalling I experimented with quart sized batches and different "reciepes" and found out that Ebay bought Fermax nutrient , Distillers yeast and 1/4 tsp. of baking soda per litre/quart accelerates the fermentation process (at least with my water with a pH of 7.2). Adding the baking soda before pitching the yeast more than doubled the speed of fermentation. As soon as it completes I will post the results.
Dnderhead
Angel's Share
Angel's Share
Posts: 13666
Joined: Sun Dec 23, 2007 8:07 pm
Location: up north

Re: Using baking soda to accelerate fermentation

Post by Dnderhead »

that I cant git a handel on that one,as yeast does not like sodium. if you have to rase PH your be better off with potassium bicarboate.
but yeast will work in a wide range of PH from 3.5--8. most brewers lower ph to 5.5-6 . not for the yeast but for enzymes and keep out infections.
diesel4ever
Novice
Posts: 99
Joined: Sun Nov 29, 2009 7:40 pm

Re: Using baking soda to accelerate fermentation

Post by diesel4ever »

Don't know why it's working either. According to everyone here it should not work but I added 1 Tbsp. to a 5 gallon wash that had been stuck at 1.048 SG for at least a week and in 48 hours (so far) it dropped to 1.020 SG
olddog
retired
Posts: 3618
Joined: Fri Jan 16, 2009 6:16 pm
Location: WEST OZ

Re: Using baking soda to accelerate fermentation

Post by olddog »

Your PH was probably wrong, and the addition probably adjusted it in the right direction.
OLD DOG LEARNING NEW TRICKS ......
diesel4ever
Novice
Posts: 99
Joined: Sun Nov 29, 2009 7:40 pm

Re: Using baking soda to accelerate fermentation

Post by diesel4ever »

Update on the baking soda experiment. My stuck wash finished today at .992 from 1.048 in 6 days and my quart jar went from 1.096 to 1.012 in 6 days which means it will probably take 7-8 days from start to finish which is the fastest ferment I've ever had to date with very simple and inexpensive ingredients.
Hack
retired
Posts: 904
Joined: Wed Feb 06, 2008 7:45 pm

Re: Using baking soda to accelerate fermentation

Post by Hack »

I've been using baking soda to raise the pH on my UJSM because with my water if I add any backset it drops the pH too low. They seem to ferment and distill just fine.

Dnderhead, I'll look for some potassium bicarbonate and see how that works.
kazanas
Novice
Posts: 39
Joined: Tue Dec 22, 2009 11:12 am

Re: Using baking soda to accelerate fermentation

Post by kazanas »

And about the making of ammonia, in your striping run??
Dnderhead
Angel's Share
Angel's Share
Posts: 13666
Joined: Sun Dec 23, 2007 8:07 pm
Location: up north

Re: Using baking soda to accelerate fermentation

Post by Dnderhead »

calcium carbonate will also work ,mite be easer to fiend. you can/should fiend at brew shop. just I thank you should stay away from sodum if you can.
and yeast can use both calcium and potassium.
diesel4ever
Novice
Posts: 99
Joined: Sun Nov 29, 2009 7:40 pm

Re: Using baking soda to accelerate fermentation

Post by diesel4ever »

Hey Kazanas what does ammonia (NH3) have to do with adding baking soda?
Dnderhead
Angel's Share
Angel's Share
Posts: 13666
Joined: Sun Dec 23, 2007 8:07 pm
Location: up north

Re: Using baking soda to accelerate fermentation

Post by Dnderhead »

nitrates (nutrient)+alkaline (rises PH)= ammonia=blue distillerant.
whatch the PH and do not make a alkaline wash keep it on the acid side.4.5-5.5 is good.
diesel4ever
Novice
Posts: 99
Joined: Sun Nov 29, 2009 7:40 pm

Re: Using baking soda to accelerate fermentation

Post by diesel4ever »

Okay. Got it. I'm sure that my finished wash is probably quite acidic so I should be fine.
Dnderhead
Angel's Share
Angel's Share
Posts: 13666
Joined: Sun Dec 23, 2007 8:07 pm
Location: up north

Re: Using baking soda to accelerate fermentation

Post by Dnderhead »

glad to help, thats what Im doing here. Well plus the pay :lol: :lol: :lol:
Hack
retired
Posts: 904
Joined: Wed Feb 06, 2008 7:45 pm

Re: Using baking soda to accelerate fermentation

Post by Hack »

kazanas wrote:And about the making of ammonia, in your striping run??
I've read that as long as the wash is still acidic, pH less than seven, there should be no problems with producing ammonia. I've been using it to bring the pH up to around 4.5 - 5 and then fermenting which would drop it again. So far no problems.

After Dnderhead's comment on yeast not liking baking soda I did a little poking around. I found beer and winemakers use it to lower pH also so it should work for distilling, this was on John Palmer's how to brew site. It did warn to avoid using too much as it can cause an off (bitter?) taste in your beer or wine. I'm not sure if that's as much of a concern for distilling though.
Dnderhead
Angel's Share
Angel's Share
Posts: 13666
Joined: Sun Dec 23, 2007 8:07 pm
Location: up north

Re: Using baking soda to accelerate fermentation

Post by Dnderhead »

I'm not saying it wont work. I'm saying there are better alternatives. like calcium carbonate witch is also cheep and yeast like it.
Hack
retired
Posts: 904
Joined: Wed Feb 06, 2008 7:45 pm

Re: Using baking soda to accelerate fermentation

Post by Hack »

Dnderhead wrote:I'm not saying it wont work. I'm saying there are better alternatives. like calcium carbonate witch is also cheep and yeast like it.
For me it's that I've been using baking soda because it's what I had and I was just wondering if I was going to be causing myself trouble by doing so. Ideally my goal is to avoid using anything like that to adjust pH.
Dnderhead
Angel's Share
Angel's Share
Posts: 13666
Joined: Sun Dec 23, 2007 8:07 pm
Location: up north

Re: Using baking soda to accelerate fermentation

Post by Dnderhead »

it could have a accumulating effect over time, as sodium does not git used by the yeast nor vaporised when distilled.
so each time you reuse the backset your adding more sodium. I do all grain mash and do not use "backsets" at all,
it was a water saving tekneek (and energy) as it was used to cook the next mash with while it was still hot.
but it also can inhibit enzymes (if doing a mash) some say it adds flavor Iv never found that to be true. I thank with sugar
wash like UJSM you have more flavor the more generations you do is because more corn/maze is being dissolved.The Effect of Distillery Backset on Hydrolytic Enzymes in Mashes"

Clara Cooper, Prof. Graham Stewart, and Dr James Bryce


In grain distilling, backset (stillage) from the bottom of the boiling column can be added to the mash, in place of water, as both a water and an energy saving measure. However, due to its acidity and other parameters, backset may cause conversion losses. The purpose of our preliminary investigations was to determine the effect of backset in all-malt mashes on a -amylase activity. This enzyme was assayed using a modified Megazyme kit. The effect on a -amylase of the addition of calcium ions to the mash was also investigated. Backset was added to account for 5% up to 25% of the mash liquid and a -amylase was determined over one hour of mashing. The addition of backset caused a significant loss in a -amylase activity. The greater the amount of backset added, the greater the loss of activity. The relationship between backset addition, length of mashing and loss of α-amylase activity is crucial in achieving fermentable extract.
Hack
retired
Posts: 904
Joined: Wed Feb 06, 2008 7:45 pm

Re: Using baking soda to accelerate fermentation

Post by Hack »

Dnderhead wrote:...it could have a accumulating effect over time, as sodium does not git used by the yeast nor vaporised when distilled...

The cumulative effect is something I've been concerned about as well.
Dnderhead wrote:... some say it adds flavor Iv never found that to be true...
I'm glad I'm not the only one who's noticed that.
HookLine
retired
Posts: 5628
Joined: Sun May 13, 2007 8:38 am
Location: OzLand

Re: Using baking soda to accelerate fermentation

Post by HookLine »

I would avoid using anything with sodium in it to adjust pH if you are recycling the backset/dunder. Stick to potassium bicarb, or especially calcium carbonate (my choice).

Dunder, interesting what that study says about the effect of using backset on conversion in all grain, and also what you say about it not improving flavour either.
Dnderhead wrote:glad to help, thats what Im doing here. Well plus the pay :lol: :lol: :lol:
Your check is in the mail, sir. No, really. Would I lie to you? :mrgreen:
Be safe.
Be discreet.
And have fun.
Dnderhead
Angel's Share
Angel's Share
Posts: 13666
Joined: Sun Dec 23, 2007 8:07 pm
Location: up north

Re: Using baking soda to accelerate fermentation

Post by Dnderhead »

If it is such a good flavor enhancer, no use going on , just fill up your glass and take a big swig :shock:
I have see the brake down on "backset" and for the most part it's acids and proteins ,the stuff that cant ferment.
most all the "goodies" are gone,(or should be if you had good ferment) some other "backset" I cant speak for like molasses. as I don't work with them that much.
Most all the web sites are confusing, Iv seen many that say " when doing a sour mash ,start the next ferment with "back set" instead of yeast"
if back set" has been threw the boiler how is the yeast to survive? do they have some supper yeast I don't know about?
I believe over time the meaning of "back set" has changed.
rad14701
retired
Posts: 20865
Joined: Wed Dec 19, 2007 4:46 pm
Location: New York, USA

Re: Using baking soda to accelerate fermentation

Post by rad14701 »

bioweb.sungrant.org wrote:“backset”, which is recycled water from the end of the ethanol distillation process.
Definition hasn't changed... But I think it gets confused with trub and undistilled wash/mash at times...
Post Reply