Maple Sap
Moderator: Site Moderator
-
- Rumrunner
- Posts: 577
- Joined: Mon Feb 06, 2006 3:07 am
- Location: Lithuania
I don't think that maple sap will have all that much sugar in it (i.e. be useful as a straight wash) -- I know that maple syrup brandy is made in Canada, and it sounds really nice. But that involves boiling the sap to make a syrup (thus concentrating it).
It'd be interesting to find out the SG of fresh maple sap... I've thought about making same from Lithuanian maples (which are lower in sugar than candadian sugar maples), but I've just been too lazy to drill holes into my maples... (I'm a softy).
Aidas
It'd be interesting to find out the SG of fresh maple sap... I've thought about making same from Lithuanian maples (which are lower in sugar than candadian sugar maples), but I've just been too lazy to drill holes into my maples... (I'm a softy).
Aidas
Nisi te iuvat cibus, plus bibe vini!
-
- retired
- Posts: 20865
- Joined: Wed Dec 19, 2007 4:46 pm
- Location: New York, USA
-
- Rumrunner
- Posts: 577
- Joined: Mon Feb 06, 2006 3:07 am
- Location: Lithuania
Exactly.rad14701 wrote:Considering how it takes about 40 gallons of maple sap to get 1 gallon of maple syrup, the sugar content is not all that high... I haven't made maple syrup in 30+ years but I can still remember the diluted sweet taste as well as the smell of the steam that the process produced... Mmmm...
Aidas
Nisi te iuvat cibus, plus bibe vini!
-
- Swill Maker
- Posts: 196
- Joined: Fri Jul 20, 2007 3:14 pm
-
- Distiller
- Posts: 1132
- Joined: Sun Aug 20, 2006 1:30 pm
I tapped one of my trees last spring. It put out 2.5% sugar by weight. it took 10 gallons to make one gallon at 1.080. It turned light brown like weak tea. Fermented well but there was little to no taste. The maple was very subtle. If I were to do this again I would wait until the sap was buddy later in the spring to get more flavor.
-
- retired
- Posts: 20865
- Joined: Wed Dec 19, 2007 4:46 pm
- Location: New York, USA
Cooking down maple sap into syrup just so you can ferment and distill it kinda sounds like too much work for the end result... It takes far more heat to get the syrup than it will to distill... If I was going to go to the effort of making syrup again I sure wouldn't waste those efforts making it into hooch, I'd fix me some pancakes and slather 'em up... Sure would beat the 0% maple syrup you get in the stores these days...
-
- Trainee
- Posts: 775
- Joined: Sun Dec 10, 2006 11:57 am
- Location: 1000 acre farm, Ohio
If I were in the business of making "maple brandy", I'd want to use something like a reverse osmosis unit rather than trying to boil the sap up to 1.080. Not only that, you could use the water you get off of it to dilute your finished spirit, knowing that it's near mineral and taste free.
Oh well, it's probably little more work than malting your own grains four pounds at a time, drying it, cracking it yourself, and mashing it like I do and still get a decent yield.
Oh well, it's probably little more work than malting your own grains four pounds at a time, drying it, cracking it yourself, and mashing it like I do and still get a decent yield.
"If you can't dazzle them with brilliance... baffle them with bullshit."
"Don't steal. The government hates competition."
"Believe none of what you hear, and only half of what you see"
20lt small pot still, working on keg
"Don't steal. The government hates competition."
"Believe none of what you hear, and only half of what you see"
20lt small pot still, working on keg
-
- Novice
- Posts: 1
- Joined: Thu May 15, 2008 6:18 am
Re: Maple Sap
anybody know how much pure alcohol could be made from maple/birch sap?
I was thinking of reverse osmosis to up the sugar concentration to a production level, but after that my alcohol knowledge only comes from drinking it.
I was thinking of reverse osmosis to up the sugar concentration to a production level, but after that my alcohol knowledge only comes from drinking it.
-
- retired
- Posts: 20865
- Joined: Wed Dec 19, 2007 4:46 pm
- Location: New York, USA
Re: Maple Sap
The sugar content is just too low to make the venture worthwhile, in my opinion... Any tree sap that is thin enough to flow through a tree, whether Maple, Birch, or otherwise, doesn't have enough sugar...kmadden wrote:anybody know how much pure alcohol could be made from maple/birch sap?
I was thinking of reverse osmosis to up the sugar concentration to a production level, but after that my alcohol knowledge only comes from drinking it.