Another fellar from TEXAS

New to distillation, or simply new to the HD forums.
** Your first post MUST go here. Introduce yourself and tell us a bit about your interest in distilling. Any posts asking distilling questions will be deleted. **

Moderator: Site Moderator

Post Reply
deepseajb
Novice
Posts: 92
Joined: Fri Aug 14, 2009 9:38 am
Location: Central Texas

Another fellar from TEXAS

Post by deepseajb »

Hello everyone, I recently built a valved reflux still from the plans on this site. OMG crystal clear 88% combined batch 1st run. I just came in from making my third run % should be higher. On my quest to make world class spirit I have one initial question. I have been racking once adding sparkalloid and distilling 5-7 days later without a clear wash, what can I do to achieve the really clear wash.I also built a carbon filter and I already beleive this is a must what a smooth difference it makes.Good evening to everyone.
There is a fine line between fishing and standing on the bank looking like an idiot !
ammo man
Swill Maker
Posts: 332
Joined: Tue Aug 11, 2009 9:45 am
Location: East Texas

Re: Another fellar from TEXAS

Post by ammo man »

Oh my gosh. Does every man in Texas make his own hootch? I am from East Texas. See post below.

Bert (ammo man)
rad14701
retired
Posts: 20865
Joined: Wed Dec 19, 2007 4:46 pm
Location: New York, USA

Re: Another fellar from TEXAS

Post by rad14701 »

I don't shoot for clear, merely sediment free...
deepseajb
Novice
Posts: 92
Joined: Fri Aug 14, 2009 9:38 am
Location: Central Texas

Re: Another fellar from TEXAS

Post by deepseajb »

Sediment free I am close but I am using dextrose and water mash with a turbo, so no need to worry about clarity ?
There is a fine line between fishing and standing on the bank looking like an idiot !
User avatar
LWTCS
Site Mod
Posts: 13031
Joined: Mon Jan 26, 2009 6:04 pm
Location: Treasure Coast

Re: Another fellar from TEXAS

Post by LWTCS »

Out of curiosity;
How big are your typical washes?
And, how much does it cost to put together your typical batch?
Trample the injured and hurdle the dead.
deepseajb
Novice
Posts: 92
Joined: Fri Aug 14, 2009 9:38 am
Location: Central Texas

Re: Another fellar from TEXAS

Post by deepseajb »

My washes are about 6.5 gallons I use 23 lbs dextrose which I get a 50 lb bag for $36 and $2-$7 for various turbos I'm trying.My last run I collected 1 3/4 gallons of 89% . I have seen where people say that lower % washes make for better product I will try that next.
There is a fine line between fishing and standing on the bank looking like an idiot !
User avatar
LWTCS
Site Mod
Posts: 13031
Joined: Mon Jan 26, 2009 6:04 pm
Location: Treasure Coast

Re: Another fellar from TEXAS

Post by LWTCS »

I recon you should put Rads "Gerber" recipe over in Tried and True on your to do list.

No nasty stuff and cheap.
Trample the injured and hurdle the dead.
deepseajb
Novice
Posts: 92
Joined: Fri Aug 14, 2009 9:38 am
Location: Central Texas

Re: Another fellar from TEXAS

Post by deepseajb »

Thanks for the tip it looks very simple and cheap, but I have some questions in my reading '' authors '' suggest not using bakers yeast because it may produce some off flavors. So is bakers yeast a must or can I use some of my bulk distillers yeast.If there are some post covering this please direct me, it would be greatly appreciated. In the meantime I will continue being overwhelmed with all the stuff on this great forum THANKS FOLKS!!
There is a fine line between fishing and standing on the bank looking like an idiot !
User avatar
Tater
Admin
Posts: 9837
Joined: Mon Oct 25, 2004 9:19 am
Location: occupied south

Re: Another fellar from TEXAS

Post by Tater »

Use either bakers yeast from what Ive read is made in a molasses environment.I also use distillers yeast I really like it in hot weather.And favor ec1118 ic cooler weather .Try a search on yeasts theirs lots of discussions on it . Were working on separating this info out and making it easier to find in the future.Had some great times in the 5 years i spent in Texas welcome to the forums .
I use a pot still.Sometimes with a thumper
HookLine
retired
Posts: 5628
Joined: Sun May 13, 2007 8:38 am
Location: OzLand

Re: Another fellar from TEXAS

Post by HookLine »

Bakers yeast makes quite good rum and neutral washes. Some think it is particularly good in rum.
Be safe.
Be discreet.
And have fun.
mjdtexan
Novice
Posts: 72
Joined: Wed Aug 12, 2009 7:33 am
Location: The Lone Star State

Re: Another fellar from TEXAS

Post by mjdtexan »

Good to see ya. I am between Houton & Humble. Yes, alot of Texans like to brew our own. I just joined this group myself and I am only in the collecting parts stage but I will be building one soon. I still have some things to work out in my head first (which kind of condenser, mostly). I do make my own wine though. I use a couple of 3 gallon glass carboys, one 5 gallon glass carboy, and two six gallon glass carboys. I make ALOT of hard apple cider. I cant keep that stuff. My neighbors actually pull into my driveway just to drink the stuff. I've also got 6 gallons of strawberry wine going right now. I will be distilling soon. Nice to meet ya
Current Wine Maker.

I see you, through the glazed eyes of a barfly------Moe Szyslak
deepseajb
Novice
Posts: 92
Joined: Fri Aug 14, 2009 9:38 am
Location: Central Texas

Re: Another fellar from TEXAS

Post by deepseajb »

Yeah same too ya nice to meet all these guys, such great info at ya fingertips. This is a hobby I have wanted to do since my beer making days in the 90's. And as I did then I have completely immersed myself in it and going full bore with at least 2 batches going at once. I have 3 stills now, MILKCAN , keg pot still , and a keg valved reflux like the one on this site with building instructions.So i will be on daily as I challenge myself to produce unique WORLD CLASS SPIRIT.
There is a fine line between fishing and standing on the bank looking like an idiot !
Post Reply