Clearing Stage

Other discussions for folks new to the wonderful craft of home distilling.

Moderator: Site Moderator

Post Reply
dmerr
Novice
Posts: 14
Joined: Thu May 26, 2011 6:20 am

Clearing Stage

Post by dmerr »

After your mash is completed with its fermentation, how important is it to allow the mash time to just sit prior to distillation? I hear people talk about the importance of letting your mash sit for a week or so after fermentation, but I didn’t know if that just applies to people brewing beer / wine.
Mud Mechanik
Distiller
Posts: 1087
Joined: Thu Mar 25, 2010 12:12 pm
Location: Deep South

Re: Clearing Stage

Post by Mud Mechanik »

That kinda depends on what recipe you used. Most here rack the finished mash off into a secondary fermenter to clear, it becomes more important to do so when using grain and corn to alleviate the possibility of scorching in the bottom of your still. Simple sugar washes do not contain all of the floating trubb that will stick to your still, although it is recommended to clear those as well. If you ain't got time to let it clear, strain it through a pillow case or something prior to running it.
Courage is being scared to death and saddling up anyway----John Wayne
dmerr
Novice
Posts: 14
Joined: Thu May 26, 2011 6:20 am

Re: Clearing Stage

Post by dmerr »

Okay,
Thanks!
rtalbigr
Distiller
Posts: 2200
Joined: Wed Nov 17, 2010 2:25 am
Location: Tennessee

Re: Clearing Stage

Post by rtalbigr »

There are some here in the forum, myself included, who don't much worry 'bout clearin. We'll run "dirty" but just run pretty slow. Others are real particular and want a good clear wash before runnin. You'll have to decide how ya want to go.

I'll give it a day or two for most of the yeast to settle out but beyond that I don't worry 'bout it too much.

Big R
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves." William Pitt
Suburban Guy
Novice
Posts: 60
Joined: Sun Jul 10, 2011 8:51 am
Location: Suburbia of course…

Re: Clearing Stage

Post by Suburban Guy »

rtalbigr wrote:There are some here in the forum, myself included, who don't much worry 'bout clearin. We'll run "dirty" but just run pretty slow. Others are real particular and want a good clear wash before runnin. You'll have to decide how ya want to go.

I'll give it a day or two for most of the yeast to settle out but beyond that I don't worry 'bout it too much.

Big R
Interesting, I like it. Short of letting the wash rest, I don't think I am going to bother racking simple washes anymore.
“Remember that a government big enough to give you everything you want is also big enough to take away everything you have.”
rad14701
retired
Posts: 20865
Joined: Wed Dec 19, 2007 4:46 pm
Location: New York, USA

Re: Clearing Stage

Post by rad14701 »

If shooting for clean neutral spirits it is important to allow time to clear... That can be read as allowing the yeast colony to settle out of the wash...
Fastill
Trainee
Posts: 898
Joined: Sat Mar 13, 2010 6:28 pm
Location: Where we drink more beer than you!

Re: Clearing Stage

Post by Fastill »

I don't rack but will give some settling time and just pull the wash off the top of the lees.
As far as racking into a secondary fermenter and letting a wash settle, I feel it is asking for an infection to set in. I don't even secondary ferment most of my beers anymore. From primary straight to the bottle.
A.D.D. and HD don't go together. This hobby takes time and dedication to learn and do it right and safe.
Fill the pool before you jump in head first!
http://homedistiller.org/forum/viewtopi ... 15&t=52975
Suburban Guy
Novice
Posts: 60
Joined: Sun Jul 10, 2011 8:51 am
Location: Suburbia of course…

Re: Clearing Stage

Post by Suburban Guy »

rad14701 wrote:If shooting for clean neutral spirits it is important to allow time to clear... That can be read as allowing the yeast colony to settle out of the wash...
Damn it…
“Remember that a government big enough to give you everything you want is also big enough to take away everything you have.”
frozenthunderbolt
Distiller
Posts: 1417
Joined: Tue Apr 19, 2011 3:01 am
Location: North island of New Zealand

Re: Clearing Stage

Post by frozenthunderbolt »

rad14701 wrote:If shooting for clean neutral spirits it is important to allow time to clear... That can be read as allowing the yeast colony to settle out of the wash...
Chilling your wash at 4 Celcius for a few days will help it fall clear
Where has all the rum gone? . . .

Every new member should read this before doing anything else:
dmerr
Novice
Posts: 14
Joined: Thu May 26, 2011 6:20 am

Re: Clearing Stage

Post by dmerr »

rad14701 wrote:If shooting for clean neutral spirits it is important to allow time to clear... That can be read as allowing the yeast colony to settle out of the wash...
So by allowing my mash to "clear," doe’s the yeast just settle at the bottom or actually leave completely? Assuming this is a plain sugar wash and fermentation is completed around a week(ish) how long would you suggest I let my mash clear?
Dnderhead
Angel's Share
Angel's Share
Posts: 13666
Joined: Sun Dec 23, 2007 8:07 pm
Location: up north

Re: Clearing Stage

Post by Dnderhead »

all will just settle to bottom,if you draw off wash,add more water/sugar/nutrients it will start back up.
if you try this.dont shock the yeast,that is dont add hot/cold water and a whole bunch of sugar at once.
mash rookie
Angel's Share
Angel's Share
Posts: 2228
Joined: Tue Dec 07, 2010 8:20 am
Location: Pacific Northwest

Re: Clearing Stage

Post by mash rookie »

Rad has already been quoted here but I have to whole hardily agree. If you are making a neutral wash you will get much better results (flavor or lack there of) from a well cleared wash. When I have time I like to set mine out doors where it is cool for a week. The cool nights slow the last of yeast activity and allow it to clear. I set up high enough that I can siphon it without disturbing the trub.

MR
Post Reply