I am trying to nail down my AG process and am hoping some of you guys could help me get some things figured out. I want to do a 100% corn whiskey. My mash pot is a 10-12 gallon pot, and I want to maximize the alcohol yield. I have read here that regular baker's yeast can tolerate 10-12% of ABV before poisoning itself to death and I'd like to get the wash to that ABV.
I know that I'm going to need the equivalent of about 1.75 pounds of sugar for each gallon of water to reach the 12% ABV wash.
The mother-site's documentation at http://homedistiller.org/grain/yield/typical" onclick="window.open(this.href);return false;" rel="nofollow specifies that most brewers will experience an 80-90% conversion rate of the maximum possible yield, which for corn is 80%. An 85% conversion of the maximum possible yield for corn calculates out to a 68% conversion. This means that for every pound of corn, I can reasonably expect 0.68 pounds of sugar. But to reach the minimum required sugar content the yeast needs to make a 12% wash (1.75 pounds per gallon), I need to add 150% more corn which comes out to 2.5 pounds of corn per gallon of water.
But let's say that I want to accomodate for a less than ideal 85% conversion rate, assuming I'll only reach 70% conversion of the maximum possible yield resulting in an actual 56% conversion of the total weight of the grain. This would calculate out to about 3.125 pounds of corn per gallon of water. So for a 10 gallon mash, I need to use 31 pounds of grain?
This seems awfully heavy on the grain compared to what I've read (1.5 - 2 pounds of grain per gallon of water)..
Where am I going wrong here? Are these calculations correct and I just need to adjust my expectations of of the wash's ABV? 1.5 - 2 pounds of grain would have my wash at about 6-8% ABV, which I guess is still acceptable.
Corn conversion rates? Grain heavy?
Moderator: Site Moderator
-
hwy419
- Novice
- Posts: 47
- Joined: Thu Oct 29, 2009 1:05 pm
- Location: Birmingham, AL
Corn conversion rates? Grain heavy?
“Quality is never an accident;
it is always the result of high intention, sincere
effort, intelligent direction and skillful execution;
it represents the wise choice of many alternatives.”
-William A. Foster
it is always the result of high intention, sincere
effort, intelligent direction and skillful execution;
it represents the wise choice of many alternatives.”
-William A. Foster
-
Prairiepiss
- retired
- Posts: 16571
- Joined: Sat Dec 18, 2010 7:42 am
- Location: Somewhere in the Ozarks
Re: Corn conversion rates? Grain heavy?
For an AG 6% is closer to what most get. Or shoot for. 10% to 12% is more for sugar washes. Stay closer to 6% like everyone else does.
If your wanting to do an all corn AG. What did you plan to do for enzymes?
If your wanting to do an all corn AG. What did you plan to do for enzymes?
It'snotsocoldnow.
Advice For newbies by a newbie.
CM Still Mods
My Stuffs
Fu Man
Mr. Piss
That's Princess Piss to the haters.
Advice For newbies by a newbie.
CM Still Mods
My Stuffs
Fu Man
Mr. Piss
That's Princess Piss to the haters.
-
rad14701
- retired
- Posts: 20865
- Joined: Wed Dec 19, 2007 4:46 pm
- Location: New York, USA
Re: Corn conversion rates? Grain heavy?
Sugar wash yields will be 7% per pound per gallon... With grains you're looking at ~3% per pound per gallon...
-
NcHooch
- retired
- Posts: 1939
- Joined: Sat Jan 30, 2010 8:40 pm
- Location: The Ol' North State
Re: Corn conversion rates? Grain heavy?
you're going to find that all that math you're doin won't apply to a corn mash. And understand that not all corn is created equal (some corn has more sugar and starch than others).
What's your plan for all-corn mash? ...are you planning on malting some of your corn?, or using commercial enzymes?
the absolute max you're gonna be able to deal with in a 10 gal mashtun is about 20 pound but this is something only a experienced brewer should try ...mainly because it's gonna turn super thick like breakfast oatmeal and burn to the bottom of the pot. ...then it's game-over.
I'd recommend you slow down a bit and do some experiments with your 5gal mashtun and nail down your process there before you run the big batch. start with 8 pounds of corn for 5 gal.
What's your plan for all-corn mash? ...are you planning on malting some of your corn?, or using commercial enzymes?
the absolute max you're gonna be able to deal with in a 10 gal mashtun is about 20 pound but this is something only a experienced brewer should try ...mainly because it's gonna turn super thick like breakfast oatmeal and burn to the bottom of the pot. ...then it's game-over.
I'd recommend you slow down a bit and do some experiments with your 5gal mashtun and nail down your process there before you run the big batch. start with 8 pounds of corn for 5 gal.
NChooch
Practice safe distillin and keep your hobby under your hat.
Practice safe distillin and keep your hobby under your hat.
-
hwy419
- Novice
- Posts: 47
- Joined: Thu Oct 29, 2009 1:05 pm
- Location: Birmingham, AL
Re: Corn conversion rates? Grain heavy?
Thanks guys. I have converted corn before rather successfully, but only tested by taste and not SG. This is why I was just a bit confused about the ABV of the wash.
I am a new "poster" here, but been lurking for years. I have some raw alpha and beta amylase i'll be using to actually convert the starches to sugar.
)
NcHooch wrote:are you planning on malting some of your corn?, or using commercial enzymes?
I appreiate you guys watching out for mePrairiepiss wrote:What did you plan to do for enzymes?
This is what I was suspecting when I was making my post. 6% ABV wash will bring me back down to the 1.5-2 pounds-pounds-of-corn-per-gallon of water range, which will work for mePrairiepiss wrote:For an AG 6% is closer to what most get. Or shoot for.
“Quality is never an accident;
it is always the result of high intention, sincere
effort, intelligent direction and skillful execution;
it represents the wise choice of many alternatives.”
-William A. Foster
it is always the result of high intention, sincere
effort, intelligent direction and skillful execution;
it represents the wise choice of many alternatives.”
-William A. Foster
-
NcHooch
- retired
- Posts: 1939
- Joined: Sat Jan 30, 2010 8:40 pm
- Location: The Ol' North State
Re: Corn conversion rates? Grain heavy?
hwy419 wrote:
I appreiate you guys watching out for meI am a new "poster" here, but been lurking for years.
)
Hard to imagine someone avoiding all this fun for years
welcome aboard.
NChooch
Practice safe distillin and keep your hobby under your hat.
Practice safe distillin and keep your hobby under your hat.
-
rtalbigr
- Distiller
- Posts: 2200
- Joined: Wed Nov 17, 2010 2:25 am
- Location: Tennessee
Re: Corn conversion rates? Grain heavy?
Using 100% corn and powdered amylase your yields are going to be pretty low. Last time I did it I was getting 4.8%. A lot has to do with the corn that's available but a lot has to do with the enzymes (you might consider using some gluco as well). The enzymes you get with a malted grain just do a better job. If you want the straight corn flavor adding about 2 lbs of sugar for each 5 gal of water will help your yield a lot but will still give you good corn flavor. It's not my favorite drink but the family really thinks they're getting something special.
Big R
Big R
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves." William Pitt
-
tom sawyer
- Swill Maker
- Posts: 155
- Joined: Wed Aug 15, 2012 7:00 am
- Location: MO USA
Re: Corn conversion rates? Grain heavy?
I'm no expert but I've done a lot of barley mashes and am getting into corn just now. I personally don't think corn is 80% starch to begin with. It has a thick waxy cover and a decent' sized germ cmpared to a barley kernel. I'd guess it might be more like 70%. But thats just based on looking at the stuff and I'm still on my first bag of cracked corn.
Secondly, you didn't mention moisture, I'd expect corn to be 4-5% moisture and the values you mentioned earlier are generally given on a dry basis. So reduce your result by 5%.
Third, cracked corn has some pretty big chunks and even with a good long cooking I think you might find that some of that starch stuffed back up in the bigger pieces might not get completely gelatinized and/or converted. If you want to avoid this then crack it finer or grind it. I tried mashing some corn meal once after cooking, using some barley malt and it stuck bad so I don't recommend using as fine a grind as a meal. But you might be able to run cracked corn through a grain mill or roller mill. I haven't tried this, I just figure on getting what I get and adding a little more corn to get the desired sugar level.
The last thing to consider is that the corn holds onto a certain amount of moisture. I know barley malt holds about a pint per pound, I don't know about corn. But this liquid volume is lost, and on the other hand the sugar increases volume a bit. So that complicates the calculation a little since the bound water in the grain has the same sugar concentration as what you run off so you will always lose that unless you sparge. I don't see doing that with a corn mash.
I usually get 75% of what I expect from barley, it gives 36 points per pound per gallon and I average around 27ppg. In my first few mashes with corn I think I'm getting in the 20-24ppg range from the corn part. That'd put you needing around 3-4lb corn per gallon.
Secondly, you didn't mention moisture, I'd expect corn to be 4-5% moisture and the values you mentioned earlier are generally given on a dry basis. So reduce your result by 5%.
Third, cracked corn has some pretty big chunks and even with a good long cooking I think you might find that some of that starch stuffed back up in the bigger pieces might not get completely gelatinized and/or converted. If you want to avoid this then crack it finer or grind it. I tried mashing some corn meal once after cooking, using some barley malt and it stuck bad so I don't recommend using as fine a grind as a meal. But you might be able to run cracked corn through a grain mill or roller mill. I haven't tried this, I just figure on getting what I get and adding a little more corn to get the desired sugar level.
The last thing to consider is that the corn holds onto a certain amount of moisture. I know barley malt holds about a pint per pound, I don't know about corn. But this liquid volume is lost, and on the other hand the sugar increases volume a bit. So that complicates the calculation a little since the bound water in the grain has the same sugar concentration as what you run off so you will always lose that unless you sparge. I don't see doing that with a corn mash.
I usually get 75% of what I expect from barley, it gives 36 points per pound per gallon and I average around 27ppg. In my first few mashes with corn I think I'm getting in the 20-24ppg range from the corn part. That'd put you needing around 3-4lb corn per gallon.