Bokabob product output too hot – approx 50°C

[pomiataa]

Is this a problem and why?

[olddog]

That's the way it is, most of us have built a small inline leibig onto the output tube.

[rednose]

This problem was discussed in this thread, maybe you are interested to read pomiataa:

http://homedistiller.org/forum/viewtopi ... 54&start=0

[olddog]

Here's mine

Bokabob

Close up of the mini-leibig

[pomiataa]

I did something similar in a small potstill for essences.

But if it is just for better alcoholmeter readings what will happened if we put the copper parrot in a pot with enough water at 20°C?

[rednose]

That's mine, very compact.

It's still hot, had two runs today, UJSSM and rum.

[pomiataa]

Thank you guys!

[rad14701]

http://homedistiller.org/forum/viewtopi ... 2#p6777642

[pomiataa]

This is the simplest and cheapest way. I also try to use what I have as much as possible.
I was thinking of something similar because I’ve seen similar soldering on many AC’s and fridges.

I had also another idea:
What will happen if the copper parrot is in a pot full with water at 20°C?
Something like this:

cooling.jpg (10.54 KiB) Viewed 520 times